Iec60884 Clause 14.23.2 Socket -Outlet Torque Tester
Product information
The tester is conforms to IEC 60884-1 2013 clause 14.23.2, IEC
60335-1 clause 22.3, IEC60065 clause 15.4.1 and figure 11 and so on
.
It is used to test the strain force of insertion. A device provided
with pins intended to be introduced into fixed socket-outlets shall
not impose undue strain on these socket-outlets.
Standard clause
The equipment is inserted into a fixed socket –outlet complying
with this standard ,the socket –outlet is pivoted about a
horizontal axis through the axis of the live socket –contacts at a
distance of 8mm behind the engagement face of the socket –outlet
and parallel to this engagement face .
The additional torque which has to be applied to the socket –outlet
in order to maintain the engagement face in the vertical plane
shall not exceed 0.25Nm .
Structure
1 – balance weight
2 – measuring bubble
3 – level bubble
4 – measuring weight
5 – height regulation screw
6 – support rod
Parameters:
| weight | 2.5N*1, 1N*1 |
| Plug | UL plug*1, European plug*1,all-purpose plug*1 |
| Conforms to standard | IEC60884,VDE0620,IEC60598,IEC60065Fig11 |
| Arm of force | 0-200mm |
| The distance from the contact surface and the Axis of the surface | 8mm |
Operation steps
- Put the device on a level table, and adjust the device to
horizontal.
2.Hang the 4 - measuring weight on balance arm, and adjust the 5 – height regulation screw, make the balance arm in horizontal.When balance arm in
horizontal, air bubble of 2 – level bubble in center position.
3.Remove the 4 - measuring weight, adjust the 1 – balance weight position, keep the balance arm in horizontal position. And make
the balance arm keep a distance about 1mm to the 6 - support rod.
4.Install the test sample on device, tighten the screw. Now the
balance arm up.
5.Hang the 4 - measuring weight on balance arm. Adjust the position of 4 - measuring weight, record the position where make the balance arm level, air bubble
of 2 – measuring bubble in center position, balance arm keep 1mm distance to 6 - support rod. Say the position located at 10.3cm.
6. Torque measurement
(1) The appropriate weight is hung on the lower scale.
(2) Move the weight slowly until the balance arm is in a horizontal
state.
7. Torque of the sample applied to the socket: Scale value X weight
For example:Torque:0.12mX2.5N=0.3Nm
About us
Guangzhou Hongce Equipment Co., Ltd is a leading company in
inspection equipment industry, established in 2003 and located in
Guangdong, China. Our company introduced advanced equipment,
combined with the most advanced technology production processes,
strict quality control system to control the entire process of
production. The company combined with a number of high-tech
management personnel and advanced equipment, and together with the
modern management, computer design and control, our products has
reached the international advanced level. The company set R&D
design, production, sales as one, specializing in producing
electric wire inspection equipment of plug and socket, mechanical
robustness testing equipment of electronics, inspection equipment
of electronics’ on-fire danger, testing indicator of anti-electric
shock and solid objects' entry, general inspection equipment, and
other non-standard testing equipment. Our products enhance good
selling at home and abroad, and have established supply
relationships with a number of well-known companies.
