IEC 60884-1 - Tumbling Barrel Testing Machine - 5rpm / 10time Per Min

IEC 60884-1 2013 clause 24.2:

The specimens are individually subjected to the test Ec:Rough handling shocks, primarily for equipment-type specimens, procedure 2 of IEC 60068-2-31, the number of falls being
– 1 000 if the mass of the specimen without flexible cable does not exceed 100 g, Plug Socket Tester
– 500 if the mass of the specimen without flexible cable exceeds 100 g, but does not exceed 200 g, and
– 100 if the mass of the specimen without flexible cable exceeds 200 g.
The barrel is turned at a rate of five revolutions per minute, 10 falls per minute thus taking place.
After the test, the specimens shall show no damage within the meaning of this standard. In particular,
– no part shall have become detached or loosened; Plug Socket Tester
– the pins shall not have become so deformed that the plug cannot be introduced into a socket-outlet complying with the relevant standard sheet and also fails to comply with the requirements of 9.1 and 10.3;
– the pins shall not turn when a torque of 0,4 Nm is applied, first in one direction for 1 min and then in the opposite direction for 1 min.
The shutters of socket-outlets shall be tested again according to Clause 21, from paragraph 19 up to paragraph 24 (only the test of shutters).
NOTE 1 During the examination after the test, special attention is paid to the connection of the flexible cable.
NOTE 2 Small pieces may be broken off without causing rejection provided that the protection against electric shock is not affected.
NOTE 3 Damage to the finish and small dents which do not reduce the creepage distances or clearances below the values specified in 27.1 are ignored. Plug Socket Tester

Standard: IEC 60884-1 2013 clause 24.2, IEC 60598-1, IEC 60998.1, VDE0620, IEC 60068-2-31, BS1363.1, EN50075, UL60730, IEC 60312-1 and so on

Application: This device is suitable for test the drop resistance of plugs and socket-outlets, surface type mounting boxes, screw glands, gland covers, switch and other electrical accessories. Plug Socket Tester

Test sample: plugs and socket-outlets, surface type mounting boxes, screw glands, gland covers, switch and other electrical accessories.

Feature: This tester can preset test times, automatic stop when set test times completed.

Parameters:

Guangzhou HongCe Equipment Co., Ltd (hereinafter referred to as HongCe) is located in Guangzhou, China, since 2003, engaged in developing and providing test equipment and detection system for electronic & electrical products, house appliances and other products. HongCe is professionally dedicated in providing laboratory testing equipment and production line testing system, we are now the high-tech enterprises with technical superiority and R & D capabilities in test instruments industry.

Our core technologies encompass vacuum, leak testing & automatic control, laboratory test equipment & solution. Our technical leader is an expert in leak detection, his more than 2 decades of experience are a great asset to our firm. Our technical team is comprised of wellexperienced engineers and technicians.

HongCe laboratory testing equipment are designed and manufactured as per the requirements of GB, IEC, EN, UL, VDE, BS, AS, ISO standards and etc. Our main products are: switch, plug, socket and coupler test equipment; mechanical strength impact test equipment; material fire hazard test equipment, enclosure protection test probes; waterproof and dustproof environmental testing equipment; household appliances testing equipment; wire and cable testing equipment; luminaires test equipment; electric tools test equipment; information technology and audio & video test equipment. Our products are widely used in domestic and worldwide measurement & certification institutions, inspecting mechanism, laboratories, export & import inspection and quarantine bureau, various production companies and etc. Our customer includes Bureau Veritas, CSA, ITS, UL, TUV Rheinland, TUV SUD, SGS and etc.

HongCe production line testing equipment are mainly customized according to client's workpieces, such as automatic leak testing system, gas recovery system, other tailor-made system based on vacuum & leak testing technology.